Who these templates are for
Every template above opens the cookie cutter generator with the shape already loaded. Choose a size, check the 3D preview and download a print-ready STL – the model is made on your own device in a few seconds. The set covers the Halloween classics: a pumpkin, a jack-o’-lantern that cuts its own face, a friendly ghost, a bat, a witch hat and a black cat.
- Home bakers who want spooky cookies in exactly the size they like, from bite-size 50 mm treats to big 120 mm showpieces.
- Party hosts making treat bags, place cards and a Halloween dessert table – the pumpkin, ghost and witch hat have room for a piped name.
- Teachers, parents and clubs planning a decorating session – see the kids’ set below for shapes with nothing thin to snap off.
- 3D printing hobbyists looking for a quick, useful seasonal print: each cutter takes well under an hour and needs no supports.
How to make, print and use a Halloween cookie cutter
- Pick a template and open it. The generator loads the shape at a size that suits it.
- Set the size. The number is the cookie’s longest side. Each template page has a size guide with the real width and height of the cookie.
- Download the STL and open it in your slicer (Bambu Studio, PrusaSlicer, Cura or OrcaSlicer). It is already oriented rim-down, so it needs no supports.
- Print, wash and dry the cutter before its first use.
- Roll, chill and cut. Roll the dough to an even 5–6 mm, press the cutter straight down (no twisting), lift the cookie with a palette knife and chill the tray for 10–15 minutes before baking.
The shape is mirrored inside the STL on purpose: you print the cutter rim-down and turn it over to use it, so the cookie comes out the right way round – the witch hat’s bent tip and the cat’s tail point the same way as in the preview.
Choosing the right dough
Halloween cookies are mostly orange, white and black, and the dough can do half the colouring for you. Vanilla sugar cookies without much baking powder keep sharp edges and give a pale base for orange pumpkins and white ghosts. Cocoa or black cocoa dough makes bats, cats and witch hats that need no icing at all. Spiced dough with cinnamon, ginger and nutmeg suits pumpkins and smells like autumn. For the jack-o’-lantern, choose a firm, low-spread dough so the face holes do not close up in the oven. Whatever the dough, chilling the cut cookies before baking is the single best way to keep corners crisp.
Sizes at a glance
Most Halloween cookies look right at 80–100 mm. The pumpkin, ghost and witch hat are compact and still cut cleanly at 50–60 mm, which is handy for treat bags and cupcake toppers. The bat is wide and short, so its size is the wingspan: 100 mm across is about 46 mm tall. Keep the jack-o’-lantern at 75 mm or more so its eyes and nose stay big enough to push out, and the black cat at 70 mm or more so the tail does not brown before the body. The generator goes from 30 to 200 mm; above 120 mm, set the blade to 1.2 mm so the cutter does not flex.
Print settings for PLA cookie cutters
| Setting | Value |
|---|---|
| Material | PLA (easiest) or PETG; food-contact grade if you can get it |
| Nozzle | 0.4 mm (use a 1.2–1.6 mm blade with a 0.6 mm nozzle) |
| Layer height | 0.2 mm |
| Walls / perimeters | 2–3 – the 1 mm blade prints solid |
| Infill | Any – the cutter is thin walls only |
| Supports | None |
| Blade | 1.0 mm thick, 15 mm tall (1.2 mm above 120 mm) |
| Print time | About 25–40 minutes per cutter |
To print the whole set at once, download each STL and arrange them on one build plate in your slicer, leaving a few millimetres between the grip rims. Orange or black filament makes your Halloween cutters easy to find next year.
Halloween cookie set ideas
Classic Halloween plate
All six shapes on one tray: orange pumpkins, white ghosts, black bats and cats, and purple witch hats give a plate that looks varied even with only four icing colours. Uses: Pumpkin, Jack-o’-Lantern, Ghost, Bat, Witch Hat, Black Cat.
Pumpkin patch set
A plain pumpkin for piped faces and a jack-o’-lantern that cuts its own face. Bake both at 90–95 mm, then add a few at 60 mm for a patch of big and small pumpkins. Uses: Pumpkin, Jack-o’-Lantern.
Kids’ decorating party set
Round, chunky outlines with nothing thin to snap off. The ghost needs only white icing and two dots, so even small children finish a cookie they are proud of. Uses: Ghost, Pumpkin, Witch Hat.
Spooky night silhouettes
Bats, a black cat and a witch hat baked in black cocoa dough look striking with no icing at all – add yellow eyes and a round moon cookie behind them. Uses: Bat, Black Cat, Witch Hat.
More festivals are coming up: the 10 Diwali cookie cutters – diya, rangoli, lotus, kandil lantern and more – are ready for 8 November 2026, and the 30 Christmas cookie cutters cover trees, gingerbread people, Santa and a sleigh. Need a shape that is not here? The cookie cutter generator turns any simple image or name into a cutter.
Tips for festive cookie cutters
- Print your cutters 2–3 weeks before the festival so you have time to test a batch.
- Chunky shapes are easiest for kids to decorate; shapes with thin parts (antlers, tassels, sparks) work best at 100 mm or larger.
- Every template prints as a single piece – separate parts are joined by thin bars on the top rim.
- Want your own design? Use the cookie cutter generator with any image or name.
Frequently asked questions
Are these Halloween cookie cutter STL files free?
Yes. All 6 templates are free to open, resize and download as STL files. There is no account and no watermark, and the model is built in your browser, so nothing is uploaded.
What size should a Halloween cookie cutter be?
Most Halloween cookies are 80–100 mm on the longest side, and each template opens at a size that suits its shape (90–100 mm). The pumpkin, ghost and witch hat still cut well at 50–60 mm. The bat is measured across its wings, so a 100 mm bat is only about 46 mm tall. Keep the jack-o’-lantern at 75 mm or more so its face holes stay big enough to release the dough.
How does the jack-o’-lantern cut its face?
The eyes, nose and grin are small cutters printed in the same part as the outline. A 4 mm thick web of 8 mm wide bars on the grip side holds them rigidly, well above the dough. One press cuts the pumpkin and its face; push the face pieces out through the open tops with a fingertip or a chopstick.
What are the best print settings for a PLA cookie cutter?
Use PLA or PETG with a 0.4 mm nozzle, 0.2 mm layers, 2–3 walls and no supports. The STL is already oriented with the grip rim on the bed. A 90 mm cutter usually takes 25–40 minutes.
Are 3D printed cookie cutters food safe?
They are generally fine for the brief contact of cutting chilled dough if you look after them, but they are not as easy to clean as metal cutters. Layer lines can trap dough, so use a filament sold as suitable for food contact if you can, wash by hand in warm (not hot) soapy water, dry them straight away and keep PLA out of the dishwasher, because heat softens it. Replace a cutter once it is scratched or stained, and keep cutters used for clay or play dough separate.
How do I make black Halloween cookies?
Use a cocoa dough and swap part of the cocoa for black cocoa powder, or add a little black gel food colour. Dark dough hides browning, so set a timer and bake by time rather than colour. Black cookies need no icing for bats, cats and witch hats – two yellow eyes are enough.
When should I print my Halloween cookie cutters?
Halloween is on 31 October 2026. Each cutter takes under an hour to print, so the whole set of 6 fits into one evening – print a few days early so you have time for a test batch.
More collections: Diwali cookie cutters · Christmas cookie cutters